Showing posts with label Plague Bearers. Show all posts
Showing posts with label Plague Bearers. Show all posts

Plague Bearers Conversion pt II

The hot glue adds some nice mass to the model, but it's hard to detail since it doesn't hold any shape. Normally I would just do that and call it good, but it wouldn't make for good reading.

Digging around my electrical tools I had an idea... The soldering Iron! If you haven't used one before they are quite simply a low voltage tool to melt soft metals to create a bonding material for electrical components. For us real men, they are great for burning shit too!

With that said if you decide to use a soldering iron be very careful not to burn yourself. They get extremely hot and can burn you severely. I strongly suggest only plugging it in when you will use it then immediately unplug it when you are done. Speaking from experience I've burned enough things (like carpets) I wish I hadn't haha.


I apologize for the bad pun...


The two prong pitch fork and the torch to the right of it are the same bit. Initially I wasn't trying to make a torch, but these things just happen sometimes, lol.


The box was a little short on swords so I had to improvise a little. The ones above were mostly "bones" from the kit.


After heating up the soldering iron I melted the models carefully. I applied the iron much like a paint brush.


This model has a little work done to the eyes and torso. I decided to, if possible, keep the jaw details and just carve the eye into a cyclops.


Here I was experimenting with adding bullet holes and "battle damage" to the model. The other ones I have claw marks and spilling guts.


Another Plague Bearer.


This sword was a Gene Stealer claw. I wish I had more of these as they were fun to detail.


Nurgle Standard Bearer. I'll probably add something to the standard to make it look more convincing.


Both models here have the same weapon, though the one on the right has had the iron put to it.



They're starting to look a little more Nurglish. The next step will be the hot glue gun to the horns to bulk them out a bit. I'm still debating on if the bodies should get hot glue since it doesn't mold very easily and doesn't hold detailed shapes.

Plague Bearers Conversion pt I

Looking over my army I realized I am lacking in troop choices. I have plenty of Blood Letters (thanks to them being plastic now) but I only had 5 of the other types. At the price of $25-30 for 5 models (ouch) and the fact that you need to field lots and lots to be effective I decided to find a cheaper alternative (not to mention an excuse to tear something apart WOOT).

After digging through various catalogs I came to find the Vampire Count's Zombie Horde set; 20 models for $30. Best of all, they're all plastic! I went to my local game store and to my surprise they had one box left (though I'm sure he's lying as usual but meh...the tangled webs we weave). Anyway, I got to work right away with the new vigor of having something to kit bash! Plastic for the Plastic God!

Plague Bearers need to have two things
  • Cyclops - they all (usually) have just one eye @__x
  • headgear - No I'm not talking about the wrestling kind...more of a slimy horn sticking out of their heads.
With that in mind I got to work...


One thing I needed was more swords. I took the three scythes that came in the box and removed the blades. The left hands had a good hilt on the instrument hands, so I cut and pinned them in place.


So far so good. They have other weapons available like bones clubs, but I wanted to keep it WYSIWYG. The guy on the left has both a Plague sword and instrument of chaos now (notice the foot he's holding haha).


Next I drilled a small pilot hole in each of their mugs...


...and gave them a brass rod lobotomy. I was tempted to keep it this length, but it might make fielding a hassle.

Next step I wanted to try some cheap texturing. Sure, you can Green Stuff, but I wanted something faster and easier than that. It would defeat the purpose of making a cheap model if you have to invest more expensive materials.


I broke out the hot glue gun and gave the test model a glue bath.


It turned out pretty neat so far. The only question is if I'll be able to add detail to the glue areas or not.


The green models are the original Pewter models. Five of those are the same price as twenty of the ones I made. Not a bad deal!


I like 'em so far. I'll have more pics up pretty soon.